It’s wise to inspect your drone for damage before going out in the field to ensure that it’s ready and safe to fly. It’s advised to print this page out and include it in the bag for your drone so you can always refer to it to prepare for a successful operation: 1. Below is a list of factors that you should make sure you have reviewed before you go out into the field. At a controlled low altitude, fly within range of any interference and recheck all controls and stability.While every operator and operation is different, it’s wise to take some time before every flight to ensure you have the proper equipment and conditions for a successful flight.If required by flight path walkthrough, verify any noted obstructions that may interfere with the drone.Verify all controller operations for heading and altitude.Start the drone propellers to inspect for any imbalance or irregular operation.Verify communication with the drone and that the drone has acquired GPS location from at least 4 satellites.Check that any equipment, such as a camera, is securely attached.Check battery levels for the aircraft and control station.Check fuel for the correct type and quantity.Check the flight termination system, if installed.Check onboard navigation and communication data links.Check for correct movement of control surfaces using the control station.Check that control link correct functionality is established between the aircraft and the control station.Check ground support equipment, including takeoff and landing systems, for proper operation.Check that the display panel, if used, is functioning properly.Inspect the control link transceiver, communication/navigation data link transceiver, and antennas.Calibrate drone compass prior to any flight.Inspect the avionics, including control link transceiver, communication/navigation equipment, and antennas.aircraft, control unit) have an adequate energy supply for the intended operation and are functioning properly. Inspect the propulsion system, including powerplant, propellers, rotors, ducted fans, etc.Inspect servo motors, including attachment points.Inspect moveable control surfaces, including airframe attachment points.Inspect registration markings for proper display and legibility.Inspect the airframe structure, including landing gear, all flight control surfaces, and linkages.Visually inspect the condition of the drone components.Pay attention to the weather conditions.ĭrone Preflight Inspection Checklist – SampleĮven if the drone manufacturer has a written preflight inspection procedure, it is recommended that the Remote Pilot ensure that the following inspection items are incorporated into the preflight inspection procedure required by part 107 to help the Remote Pilot determine that the drone is in a condition for safe operation.Ĭonduct a preflight visual or functional check of the aircraft, including (but not limited to) the steps below.Check the area around your drone that is clear to take-off and land.Check that your controller and drone are properly connected.Check that your battery is charged and has enough power for flight.Check the rules and regulations for the area you plan to fly.

Look for signs of wear, or cracks in the propellers. Check the physical condition of the drone.

Pre flight checklist drone